HI151-00 จาก Hanna เป็นเครื่องวัดแบบโพรบพับหัววัดสำหรับการพกพา ย่านการวัดอุณหภูมิ -50.0 ถึง 300°C มีความแม่นยำสูงในช่วงอุณหภูมิที่กว้าง (รุ่น HI151-00 วัดอุณหภูมิในหน่วยองศาเซลเซียสเท่านั้น)
หัววัดเซ็นเซอร์ทำจากสแตนเลส (AISI 316) ขนาดหัววัดยาว 117 มิลลิเมตร เส้นผ่านศูนย์กลาง 3.5มิลลิเมตร ใช้พลังงานจากแบตเตอรี่ 1.5V AA อายุการใช้งาน 25000ชั่วโมง เหมาะอย่างยิ่งสำหรับการตรวจสอบอุณหภูมิอาหาร ผลไม้ เนื้อสัตว์ สินคุณภาพสูงจาก USA มีใบรับรองการสอบเทียบ (Certificate) ขายราคาถูก จัดส่งทั่วไทย
วิดีโอแนะนำสินค้ารุ่น HI151-00
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 oC) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Features HI151-00
- CAL Check™ – As you unfold the stainless steel probe, the Checktemp®4 automatically turns on and immediately performs a calibration test. This unique Hanna feature provides the security of knowing you have accurate measurements. CAL Check™ also lets you know if your battery level is low or if your meter requires recalibration.
- AISI 316 Stainless Steel Probe – The sharp-tipped penetration probe is composed of stainless steel, providing fast and accurate temperature measurements of a wide variety of samples.
- Enhanced Battery Life – The Checktemp®4 uses AA batteries and offers an exceptional 25,000 hours of continuous use.
- Auto Shut-off – The battery life of the Checktemp®4 is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
Specification HI151-00
- Range (°C) -50.0 to 300 °C
- Resolution (°C) 0.1°C (-50.0 to 199.9°C); 1°C (200 to 220°C)
- Accuracy (°C)
- ± 0.2 °C (-30.0 to 170.0 °C);
- ± 0.4 °C (-50.0 to -30.0 °C and 170.0 to 199.9 °C);
- ± 1 °C (200 to 300 °C) ± 1 digit
- CAL Check™ automatic, at start-up
- Stainless steel probe with penetration tip; 117 x dia 3.5 mm (4.6 x dia 0.14’’)
- Battery Life 1.5V AA / approx. 25,000 hours of continuous use
- Auto-off after 8 minutes of non-use
- Environment 0 to 50°C (32 to 122°F); RH max 95%
- Dimensions 165 x 50 x 20 mm (6.5 x 2.0 x 0.8’’)
- Weight 100 g (3.5 oz)
Ordering Information HI151-00 is supplied complete with battery and instruction manual.
มีสินค้าหลายสีให้เลือกตามรุ่น HI151-X
